APRILIA TUONO 1000 - 2006 Manual page 38

CHANGE THE CODE
This function is used when the old code is
available and is to be changed.
Within this function, the following message
is displayed:
"INSERT THE OLD CODE"
As soon as the old code is acknowledged,
the new code is requested; the following
message is displayed:
"INSERT THE NEW CODE"
Once the operation is completed, the
display goes back to the DIAGNOSIS
menu. If you entered with the code, this
operation will not be allowed.
Once the operation is completed, the
i n s t r u m e n t p a n e l w i l l r e t u r n t o t h e
SETTINGS menu.
CODE RECOVERY
This function is used when the old code is
not available and you need to change it. In
this case it is necessary to insert at least
two keys in the ignition switch. The first key
is already inserted, a second key is
requested with the message:
"INSERT THE 2nd KEY"
The instrument panel remains on in-
between these two keys; if the second key
is not inserted within 20 seconds the
operation is aborted. When the second key
i s a c k n o w l e d g e d , t h e n e w c o d e i s
requested with the message:
38 use and maintenance TUONO 1000
"INSERT THE NEW CODE"
Once the operation is completed, the
display goes back to the DIAGNOSIS
menu. If you entered with the code, this
operation will not be allowed.
Once the operation is completed, the
i n s t r u m e n t p a n e l w i l l r e t u r n t o t h e
SETTINGS menu.
°C/°F
This function allows you to select the unit
of measure for ambient temperature. From
this function, every time SET (2) is briefly
p r e s s e d , t h e f o l l o w i n g t w o u n i t s o f
measure are alternately displayed:
°C
°F
Press SET (2) for several seconds to store
the data; the instrument panel will return to
the SETTINGS menu.
USA
LAP
ODO
Lap timer
When confirming LAP TIMER selection [by
pressing SET (2) for several seconds] the
following options are displayed:
– EXIT
– ENABLE LAP TIMER
– VIEW TIMES
– DELETE TIMES
ENABLE LAP TIMER
This function enables lap timer operation.
Lap time is shown in the upper area of the
display, in place of the clock.
The display maintains this operation mode
even after key-off/key-on.
MPH
mi
˚F