Saddle Support Chassis - APRILIA SXV 450 - UPGRADE BOOK 2008 Manual

RIDE HEIGHT ADJUSTMENT
There are three ride height settings available.
Ride height is adjusted by changing or rotating the
bush shown in the picture into the desired position.
There are two bushes available:
A Mean height bush
B Eccentric bush for maximum or minimum height
(de-pending on mounting position)

SADDLE SUPPORT CHASSIS

ADJUSTMENT OF THE SADDLE SUPPORT CHASSIS
HEIGHT
To adjust the saddle support chassis, turn the set
screws on both sides of the vehicle at the same
time.
¼ turn ≈ 2.5 mm of movement of the rear-most
point of the rear end
The maximum movement is imposed by the limits of
the coupling between the discharge fitting and the
muffler. Do not continue tightening the set screws
when the resistance becomes excessive.
A
14
B