Changing The Headlight Bulbs - APRILIA SCARABEO 125 - 2003 Manual

CHANGING THE HEADLIGHT
BULBS
Carefully read p. 58 (BULBS).
The headlight contains:
– One low/high beam bulb (1).
– One parking light bulb (2).
To c ha nge the bulbs, pr oc eed as
follows:
◆
Unscrew and remove the screw (1).
NOTE
Upon reassembly, take care not
to reverse the position of the screws (3)
and (4).
◆
Unscrew and remove the screws (4).
◆
Remove the frame (5).
◆
Extract the reflector (6).
NOTE
Upon reassembly, install the
reflector (6) correctly, making the insertion
seats coincide with the headlight body.
LOW/HIGH BEAM BULB (HALOGEN
BULB)
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
◆
Grasp the bulb electric connector (7),
pull it and disconnect it from the bulb (1).
◆
Rotate the bulb socket (8) anticlockwise
and extract it from the reflector.
◆
Extract the bulb (1).
For the reassembly:
NOTE
Insert the bulb (1) in the reflector,
by making the two elements (9) on the bulb
match with the respective guides (10) on
the reflector.
◆
Position the bulb socket (8) in the
reflector and rotate it clockwise.
◆
Connect the bulb electric connector (7).
PARKING LIGHT BULBS
CAUTION
To extract the bulb socket, do not pull
its electric wires.
◆
Grasp the bulb socket (11), pull it and
take it out of its seat.
◆
Extract the parking light bulb (2) and
replace it with a new one of the same
type.
use and maintenance Scarabeo 125 - Scarabeo 200
59