Rear Wheel - APRILIA RS 125 - 1995 Manual

60
Fig. 36
Fig. 37

REAR WHEEL

DISASSEMBLY
a
Never press the rear brake lever after re-
moving the wheel, since otherwise the
calliper piston may go out of its seat, thus
causing the outflow of the brake fluid. In this
case consult your aprilia Official Dealer, who
will carry out the proper maintenance operation.
Read page 50 carefully.
To remove the wheel, proceed as follows:
– raise the rear part of the vehicle and place a sup-
port under the engine, to prevent the vehicle from
falling down after the wheel has been removed;
– remove the nut (1-Fig. 36);
– extract the pin (1-Fig. 37);
– remove the transmission chain from the crown, by
pushing the rear wheel forward;
– remove the wheel from the rear fork.