Maintenance - APRILIA RALLY 50 - 2000 Manual

Table of Contents

Advertisement

a
Before beginning any maintenance oper-
ation or any inspection of the vehicle,
stop the engine, extract the key from the
ignition block, wait until the engine and the ex-
haust system have cooled down and if possible
lift the vehicle by means of the proper equipment,
on firm and flat ground.
Keep away from the red-hot parts of the engine
and of the exhaust system, in order to avoid
burns.
Do not hold any mechanical piece or other parts
of the vehicle with your mouth: the components
are not edible and some of them are noxious or
even toxic.
a
If not expressly indicated otherwise, for
the reassembly of the units repeat the dis-
assembly operations in reverse order.
In case any maintenance operation should be re-
quired, it is advisable to use latex gloves.
Ordinary maintenance operations can usually be car-
ried out by the user, but sometimes a basic knowl-
edge of mechanics and specific tools are required.
If you need assistance or technical advice, consult
your aprilia Official Dealer, who can ensure you
prompt and accurate servicing. After any mainte-
nance operation, carry out the "Preliminary checking
operations", see p. 33 (PRELIMINARY CHECKING
c
OPERATIONS).
Remember: 1 mile = 1.6 km
1 km = 0.625 miles
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rally 50

Table of Contents