APRILIA RALLY 50 - 2000 Manual page 52

c
Carefully read p. 41 (MAINTENANCE).
Remember: 1 mile = 1.6 km
c
1 km = 0.625 miles
Grease the rear brake cam pin every 4000
km. If the vehicle is used on dusty roads,
this operation must be carried out more frequent-
ly.
a
The greasing of the rear brake cam pin
can be difficult or complicated for an un-
skilled operator.
52
Fig. 34
If necessary, contact your
If you want to carry out this operation by your-
self, keep to the following instructions:
Disassemble the rear wheel, see p. 50 (REAR
WHEEL).
Unscrew and remove the adjuster (1).
a
Do not dirt the shoes and the friction ma-
terial with grease, to avoid compromising
the braking efficiency of the vehicle.
a
This operation may be difficult because
the springs (2) resist considerably to the
removal of the shoes. Be careful not to
crush or bruise your hands and fingers.
Grasp the inner edge of the two friction elements
(3) at its centre and, pulling toward yourself, shake
the two shoes, thus releasing them.
Loosen the nut (4) and remove the pin lever (5).
Withdraw the cam pin (6).
a
Moderately grease only the central part of
the pin.
Avoid dirting the cam or the areas around
the pin seat with grease.
Grease the central part of the pin by using grease
for kinematic motions, see p. 77 (LUBRICANT
CHART).
Official Dealer.