Carefully read p. 65 (BULBS).
To change them, proceed as follows:
c
Unscrew and remove the two screws (1).
While removing the protection screen,
proceed carefully in order not to break the
cog.
Remove the protection screen (2).
Slightly press the bulb and rotate it anticlockwise.
c
Remove the bulb from its seat.
Insert the bulb in the socket, making the
two bulb pins coincide with the relevant
guides on the socket.
c
Correctly install a new bulb of the same type.
Upon reassembly, correctly position the
protection screen in its seat.
Tighten the screws (1) carefully, without exerting
too much pressure, in order to avoid damaging
the protection screen (2).
Fig. 54
71