APRILIA RALLY 50 - 2000 Manual page 21

c
The electrical parts work only when the
ignition switch is in position "
b
1) LIGHT SWITCH (
When the engine is started and the light switch is in
position "•", the lights are off; when the switch is in
position "b", the dashboard lights, the parking lights
and the low beam are on.
b
1a) LIGHT SWITCH (
When the engine is started and the light switch is in
•
position " ", the lights are off; when the switch is in
b
position " ", the dashboard lights, the rear parking
light and the low beam are on.
a
1b) LIGHT SWITCH (
When the engine is started and the light switch is in
•
position " ", the lights are off; when the switch is in
b
position " ", the dashboard lights, the low beam and
the parking lights are on; when it is in position "
the dashboard lights, the high beam and the parking
lights are on.
n
".
p
- - •)
F O
•
- ) -
C U P
b
•
- - ) - -
2) START PUSH BUTTON (
When the start push button is pressed and one
of the brake levers (front or rear) is activated at
the same time, the starter makes the engine run.
a
For the starting procedure, see p. 34 (START-
",
ING).
Fig. 6
r
)
21