Changing The Fuses - APRILIA CLASSIC 125 - 1997 Manual

CHANGING THE FUSES (Fig. 49)
Carefully read page 32 (MAINTENANCE).
a
Do not repair faulty fuses.
Never use fuses different from
the recommended ones.
The use of unsuitable fuses may cause
damages to the electric system or, in
case of short circuit, even a fire.
c
If a fuse blows frequently, there
probably is a short circuit or an
overload in the electric system. In this
case it is advisable to consult an
aprilia Official Dealer.
48 use and maintenance Classic 125
Fig. 49
If an electric component does not work or
works irregularly, or if the vehicle fails to
start, it is necessary to check the fuses:
Turn the ignition switch to position "
to avoid any accidental short circuit.
Pull the left side, by grasping it on its two
upper ends, and remove it.
Extract the fuses one by one and check if
the filament is broken.
Before replacing a fuse, try to find out the
cause of the trouble, if possible.
Then replace the damaged fuse with a
new one having the same amperage.
Put back the side.
ARRANGEMENT OF THE FUSES
20 A fuse
From battery to:
ignition switch, voltage regulator.
15A fuse
From ignition switch to:
all light loads.
7.5 A fuse
From ignition switch to:
ignition.
m
",