Changing The Number Plate Bulb; Changing The Front And Rear; Direction Indicator Bulbs - APRILIA CLASSIC 125 - 1997 Manual

Fig. 56
CHANGING
THE NUMBER PLATE BULB
Carefully read p. 32 (MAINTENANCE)
and p. 49 (BULBS).
To change the bulb, proceed as follows:
Unscrew and remove the screw (1-Fig.
56).
Remove the light unit (2-Fig. 57).
Extract the bulb socket (3-Fig. 57).
Withdraw the number plate bulb and re-
place it with a new one of the same type.
Fig. 57

CHANGING THE FRONT AND REAR

DIRECTION INDICATOR BULBS

(Fig. 58)
Carefully read p. 32 (MAINTENANCE)
and p. 49 (BULBS).
To change the bulb:
Unscrew and remove the screw (1).
c
While removing the indicator
lens, proceed carefully in order
not to break it.
Remove the indicator lens (2).
Press the bulb slightly and turn it anti-
clockwise.
Remove the bulb from its seat.
Correctly install a new bulb of the same
type.
Fig. 58
c
If the bulb socket has gone out
of its seat, insert it again correct-
ly, making the opening of the bulb sock-
et itself coincide with the seat of the
screw.
c
Upon reassembly, correctly po-
sition the indicator lens in its
seat.
Tighten the screw (1) carefully, without
exerting too much pressure, in order to
avoid damaging the indicator lens.
use and maintenance Classic 125 51