Changing The Fuses - APRILIA Pegaso 650 Use And Maintenance

#(!.').'
4(% (%!$,)'(4 "5,"3
Carefully read p. 58 (BULBS).
c
Before changing a bulb, check
the fuses, see p. 56 (CHANGING
THE FUSES).
The headlight contains:
U
One high beam bulb (7) (left side).
U
One parking light bulb (3).
U
One low/high beam bulb (10) (right side).
To change the bulbs, proceed as follows:
PARKING LIGHT BULB
U
Position the vehicle on the stand, see
p. 35 (POSITIONING THE VEHICLE ON
THE STAND).
a
To extract the bulb socket, do
not pull the electric wires.
U
Move the protection element (1) with
your hands.
U
Seize the bulb socket (2), pull it and re-
move it from its seat.
U
Withdraw the parking light bulb (3) and
replace it with one of the same type.
HIGH BEAM BULB (LEFT SIDE)
Carefully read p. 58 (BULBS).
U
Position the vehicle on the stand, see
p. 35 (POSITIONING THE VEHICLE ON
THE STAND).
U
Move the protection element (4) with
your hands.
U
Release the check spring (5) positioned
at the rear of the bulb socket (6).
U
Extract the bulb (7) and replace it.
LOW/HIGH BEAM BULB (RIGHT SIDE)
Carefully read p. 58 (BULBS).
U
Position the vehicle on the stand, see
p. 35 (POSITIONING THE VEHICLE ON
THE STAND).
U
Move the protection element (8) with
your hands.
U
Rotate the bulb socket (9) anticlockwise
and extract it from its seat.
U
Slightly press the bulb (10) and rotate it
anticlockwise.
U
Extract the bulb.
For the installation:
c
Insert the bulb in the bulb sock-
et, making the two bulb pins co-
incide with the relevant guides on the
socket.
U
Correctly install a new bulb of the same
type.
use and maintenance Pegaso 650 59