Page 1
U S S Technical Support and E-Warranty Certificate www.vevor.com/support CIRCULATOR PUMP INSTRUCTIONS We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
Page 3
FCC Information: CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment! This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This product may cause harmful interference.
Page 4
INSTALLATION: 1. Mounting position – Circulator must be mounted with the motor in a horizontal position. It may be mounted vertically with the motor up, provided that the system pressure is at least 20 psi (138 kPa). 2. Rotating body – Body has an arrow on the front that indicates direction of flow. To rotate body, remove the four body bolts, rotate body and replace bolts.
Page 5
CAUTION: Use supply wires suitable for 90°C – ATTENTION: Employer des fils d´alimentation adequats pour 90°C. WARNING: To avoid electrical shock, disconnect the power supply to the circulator and the main electrical unit. Acceptable Not acceptable Acceptable pump mounting positions REPLACING MOTOR ASSEMBLY: 1.
Page 6
Warning-To reduce the risk of injury, user must read instructions manual carefully. ATTENTION...
Need help?
Do you have a question about the 007-F5-7IFC and is the answer not in the manual?
Questions and answers