The Routing Screen - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 15 Routing

15.2 The Routing Screen

Use this screen to view and configure the static route rules on the ZyXEL Device.
Click Advanced > Routing to open the following screen.
Figure 88 Advanced >Routing
The following table describes the labels in this screen.
Table 65 Advanced > Routing
LABEL
Add new
Static Route
Entry
#
Status
Name
Destination IP
Subnet Mask
Gateway
Modify
202
DESCRIPTION
Click this to configure a new static route.
This is the index number of the entry.
This field displays whether the static route is active or not. A yellow bulb
signifies that this route is active. A gray bulb signifies that this route is
not active.
This is the name that describes or identifies this route.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
This parameter specifies the IP network subnet mask of the final
destination.
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
Click the Edit icon to edit the static route on the ZyXEL Device.
Click the Delete icon to remove a static route from the ZyXEL Device. A
window displays asking you to confirm that you want to delete the route.
P-660HN-51 User's Guide