Setting Up A Secure Wireless Network; Configuring The Wireless Network Settings - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 4 Tutorials
Try to connect to a website, such as zyxel.com to see if you have correctly set up
your Internet connection. Be sure to contact your service provider for any
information you need to configure the WAN screens.

4.3 Setting Up a Secure Wireless Network

This tutorial is an example of setting up a wireless network to have wireless
Internet access. In this wireless network, the ZyXEL Device serves as an access
point (AP), and the notebook is the wireless client. The wireless client can access
the Internet through the AP.
You have to configure the wireless network settings on the ZyXEL Device. You can
set up a wireless network using WPS
configuration

4.3.1 Configuring the Wireless Network Settings

This example uses the following parameters to set up a wireless network.
SSID
Security Mode
Pre-Shared Key
802.11 Mode
Click Network Settings > Wireless to open the General screen.
1
Select Enable to activate the wireless network.
2
Enter the SSID name in Wireless Network Name.
3
44
(Section 4.3.3 on page
Example
WPA-PSK
DoNotStealMyWirelessNetwork
802.11b/g/n Mixed
(Section 4.3.2 on page
51).
46) or manual
P-660HN-51 User's Guide