The Dmz Screen - ZyXEL Communications P-660HN-51 - V1.10 Manual

8.5 The DMZ Screen

In addition to the servers for specified services, NAT supports a default server IP
address. A default server receives packets from ports that are not specified in the
NAT Port Forwarding Setup screen.
Figure 50 Network Settings > NAT > DMZ
The following table describes the fields in this screen.
Table 33 Network Settings > NAT > DMZ
LABEL
Default Server
Address
Apply
P-660HN-51 User's Guide
DESCRIPTION
Enter the IP address of the default server which receives packets from
ports that are not specified in the NAT Port Forwarding screen.
Note: If you do not assign a Default Server Address, the ZyXEL
Device discards all packets received for ports that are not
specified in the NAT Port Forwarding screen.
Click Apply to save your changes.
Chapter 8 Network Address Translation (NAT)
143