Adding A Qos Queue - ZyXEL Communications P-660HN-51 - V1.10 Manual

The following table describes the labels in this screen.
Table 71 Advanced > QoS > Queue Setup
LABEL
Add new
Queue
#
Status
Name
Outgoing
Interface
Priority
Weight
Buffer
Management
Rate Limit
Modify

17.4.1 Adding a QoS Queue

Click Add new Queue or the edit icon in the Queue Setup screen to configure a
queue.
Figure 96 Queue Setup: Add
P-660HN-51 User's Guide
DESCRIPTION
Click this button to create a new queue entry.
This is the index number of the entry.
This field displays whether the queue is active or not. A yellow bulb
signifies that this queue is active. A gray bulb signifies that this queue is
not active.
This shows the descriptive name of this queue.
This shows the name of the ZyXEL Device's interface through which traffic
in this queue passes.
This shows the priority of this queue.
This shows the weight of this queue.
This shows the queue management algorithm used for this queue.
Queue management algorithms determine how the ZyXEL Device should
handle packets when it receives too many (network congestion).
This shows the maximum transmission rate allowed for traffic on this
queue.
Click the Edit icon to edit the queue.
Click the Delete icon to delete an existing queue. Note that subsequent
rules move up by one when you take this action.
Chapter 17 Quality of Service (QoS)
215