Add/Edit Policy Forwarding - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 21 Policy Forwarding
Table 84 Advanced > Policy Forwarding (continued)
LABEL
Source IP
Source
Subnet Mask
Protocol
SourcePort
Source MAC
WAN
Modify

21.2.1 Add/Edit Policy Forwarding

Click Add new Policy Forward Rule in the Policy Forwarding screen or click
the Edit icon next to a policy. Use this screen to configure the required
information for a policy route.
Figure 107 Policy Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 85 Policy Forwarding: Add/Edit
LABEL
Policy Name
Source IP
Address
Source Subnet
Mask
Protocol
Source Port
Source Mac
242
DESCRIPTION
This is the source IP address.
This is the source subnet mask address.
This is the transport layer protocol.
This is the source port number.
This is the source MAC address.
This is the WAN interface through which the traffic is routed.
Click the Edit icon to edit this policy.
Click the Delete icon to delete an existing policy.
DESCRIPTION
Enter a descriptive name of up to 8 printable English keyboard
characters, not including spaces.
Enter the source IP address.
Enter the source subnet mask address.
Select the transport layer protocol (TCP or UDP).
Enter the source port number.
Enter the source MAC address.
P-660HN-51 User's Guide