The Ipsec Status Screen; Technical Reference - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 13 IPSec

13.3 The IPSec Status Screen

Click Security Settings > IPSec > Status to open the screen as shown. Use this
screen to display and manage active VPN connections.
A Security Association (SA) is the group of security settings related to a specific
VPN tunnel. This screen displays active VPN connections. Use Refresh to display
active VPN connections. This screen is read-only. The following table describes the
fields in this tab.
Figure 80 Security Settings > IPSec > Status
The following table describes the fields in this screen.
Table 57 Security Settings > IPSec > Status
LABEL
Refresh
Interval
Status
Connection
Name
Remote
Gateway
Local
Addresses
Remote
Addresses
Action

13.4 Technical Reference

This section provides some technical background information about the topics
covered in this chapter.
188
DESCRIPTION
Select how often the screen should be refreshed from the drop-down list
box.
This field displays whether the VPN connection is up (a yellow bulb) or
down (a gray bulb).
This field displays the identification name for this VPN policy.
This is the static WAN IP address or URL of the remote IPSec router.
This is the IP address of computer(s) on your local network behind your
ZyXEL Device.
This is the IP address of computer(s) on the remote network behind the
remote IPSec router.
Click Trigger to establish a VPN connection with the remote network.
P-660HN-51 User's Guide