The Routing Screen - ZyXEL Communications VMG1312-B Series User Manual

Chapter 9 Routing

9.2 The Routing Screen

Use t his screen t o view and configure t he st at ic rout e rules on t he Device. Click N e t w or k Se t t ing
> Rou t in g > St a t ic Rou t e t o open t he following screen.
Figure 60 Net work Set t ing > Rout ing > St at ic Rout e
The following t able describes t he labels in t his screen.
Table 37 Net work Set t ing > Rout ing > St at ic Rout e
LABEL
Add new st at ic
rout e
#
St at us
Nam e
Dest inat ion I P
Subnet Mask
Gat eway
I nt erface
Modify
162
DESCRIPTION
Click t his t o configure a new st at ic rout e.
This is t he index num ber of t he ent ry.
This field displays whet her t he st at ic rout e is act ive or not . A yellow bulb signifies t hat t his
rout e is act ive. A gray bulb signifies t hat t his rout e is not act ive.
This is t he nam e t hat describes or ident ifies t his rout e.
This param et er specifies t he I P net work address of t he final dest inat ion. Rout ing is always
based on net work num ber.
This param et er specifies t he I P net work subnet m ask of t he final dest inat ion.
This is t he I P address of t he gat eway. The gat eway is a rout er or swit ch on t he sam e
net work segm ent as t he device's LAN or WAN port . The gat eway helps forward packet s t o
t heir dest inat ions.
This is t he WAN int erface used for t his st at ic rout e.
Click t he Edit icon t o edit t he st at ic rout e on t he Device.
Click t he D e le t e icon t o rem ove a st at ic rout e from t he Device. A window displays asking
you t o confirm t hat you want t o delet e t he rout e.
VMG1312-B Series User's Guide