The Static Dhcp Screen - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 7 Home Networking

7.3 The Static DHCP Screen

This table allows you to assign IP addresses on the LAN to specific individual
computers based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02.
Use this screen to change your ZyXEL Device's static DHCP settings. Click
Network Settings > Home Networking > Static DHCP to open the following
screen.
Figure 38 Network Settings > Home Networking > Static DHCP
The following table describes the labels in this screen.
Table 24 Network Settings > Home Networking > Static DHCP
LABEL
Add new static
lease
#
Status
MAC Address
IP Address
Modify
118
DESCRIPTION
Click this to add a new static DHCP entry.
This is the index number of the entry.
This field displays whether the client is connected to the ZyXEL Device.
The MAC (Media Access Control) or Ethernet address on a LAN (Local
Area Network) is unique to your computer (six pairs of hexadecimal
notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory. This address follows an industry
standard that ensures no other adapter has a similar address.
This field displays the IP address relative to the # field listed above.
Click the Edit icon to have the IP address field editable and change it.
Click the Delete icon to delete a static DHCP entry. A window displays
asking you to confirm that you want to delete the selected entry.
P-660HN-51 User's Guide