Installing Upnp In Windows Example - ZyXEL Communications P-660HN-51 - V1.10 Manual

Chapter 7 Home Networking
Use the following screen to configure the UPnP settings on your ZyXEL Device.
Click Network Settings > Home Networking > UPnP to display the screen
shown next.
Figure 40 Network Settings > Home Networking > UPnP
The following table describes the labels in this screen.
Table 26 Network Settings > Home Networking > UPnP
LABEL
State
Apply
Cancel

7.5 Installing UPnP in Windows Example

This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
Click Start and Control Panel. Double-click Add/Remove Programs.
1
120
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a
UPnP application to open the web configurator's login screen without
entering the ZyXEL Device's IP address (although you must still enter
the password to access the web configurator).
Click Apply to save your changes.
Click Cancel to restore your previous settings.
P-660HN-51 User's Guide