Figure 111 Menu 4: Applying Nat For Internet Access; Figure 112 Menu 11.3 Applying Nat To The Remote Node - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide

Figure 111 Menu 4: Applying NAT for Internet Access

The following figure shows how you apply NAT to the remote node in menu 11.1.
1 Enter 11 from the main menu.
2 When menu 11 appears, as shown in the following figure, type the number of the remote
node that you want to configure.
3 Move the cursor to the Edit IP field, press [SPACE BAR] to select Yes and then press
[ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.

Figure 112 Menu 11.3 Applying NAT to the Remote Node

Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr:
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= SUA Only
Metric= 2
Private= No
RIP Direction= Both
Press ENTER to Confirm or ESC to Cancel:
215
ISP's Name= ChangeMe
Pri Phone #= 1234
Sec Phone #=
My Login= ChangeMe
My Password= ********
My WAN IP Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set= N/A
Telco Options:
Transfer Type= 64K
Multilink= Off
Idle Timeout= 100
Press ENTER to Confirm or ESC to Cancel:
Address Mapping Set= N/A
Version= RIP-2B
Menu 4 - Internet Access Setup
Chapter 23 Network Address Translation (NAT)