Figure 163 Sample Error And Information Messages; Figure 164 Menu 24.3.2 - System Maintenance - Unix Syslog; Table 88 Menu 24.3.2 System Maintenance : Syslog And Accounting - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide

Figure 163 Sample Error and Information Messages

51 Sat Jan 01 04:12:17 2000 PP12
set 0 into if 8044e29c
52 Sat Jan 01 04:12:35 2000 PP16
53 Sat Jan 01 04:12:35 2000 PP16
54 Sat Jan 01 04:12:35 2000 PP16
55 Sat Jan 01 04:12:35 2000 PINI
56 Sat Jan 01 04:12:36 2000 PP12
set 0 into if 8044e29c
Clear Error Log (y/n):
28.3.2 Unix Syslog
The ZyXEL Device uses the syslog facility to log the CDR (Call Detail Record) and system
messages to a syslog server. Syslog and accounting can be configured in Menu 24.3.2 -
System Maintenance - UNIX Syslog, as shown next.

Figure 164 Menu 24.3.2 - System Maintenance - UNIX Syslog

You need to configure the syslog parameters described in the following table to activate syslog
then choose what you want to log.

Table 88 Menu 24.3.2 System Maintenance : Syslog and Accounting

PARAMETER
Syslog:
Active
Syslog IP Address
Log Facility
Types:
263
Menu 24.3.2 - System Maintenance - UNIX Syslog
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
Firewall log= No
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Press [SPACE BAR] and then [ENTER] to select a Local option. The log facility
allows you to log the message to different files in the server. Please refer to the
documentation of your syslog program for more details.
INFO netMakeChannDial plug in firewall
INFO Last errorlog repeat 50 Times
INFO Login Successfully
INFO SMT Password pass
INFO SMT Session Begin
INFO netMakeChannDial plug in firewall
Chapter 28 System Information and Diagnosis