Figure 38 Firewall > Configure Customized Services; Table 27 Firewall > Configure Customized Services; Configuring A Customized Service; Timeout - ZyXEL Communications P-202H V2 User Manual

P-202H Plus v2 User's Guide

9.7.4 Configuring A Customized Service

Click a rule number in the Firewall Customized Services screen to create a new custom port
or edit an existing one. This action displays the following screen.
Refer to Section 8.1 on page 76
Figure 38 Firewall > Configure Customized Services
The following table describes the labels in this screen.
Table 27 Firewall > Configure Customized Services
LABEL
Service Name
Service Type
Port Configuration
Type
Port Number
Back
Apply
Cancel
Delete

9.8 Timeout

The fields in the Timeout screens are the same for Local Network to Internet Set and
Internet to Local Network Set, so the discussion below refers to both.
101
for more information.
DESCRIPTION
Type a unique name for your custom port.
Choose the IP port (TCP, UDP or TCP/UDP) that defines your customized port from
the drop down list box.
Click Single to specify one port only or Range to specify a span of ports that define
your customized service.
Type a single port number or the range of port numbers that define your customized
service.
Click Back to return to the previous screen.
Click Apply to save your customized settings and exit this screen.
Click Cancel to return to the previously saved settings.
Click Delete to exit this screen without saving.
Chapter 9 Firewall Configuration