Service Class 2.0 Commands - ZyXEL Communications OMNI 56K User Manual
Hide thumbs
Also See for OMNI 56K:
- User manual (83 pages) ,
- Quick start manual (12 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
User's Guide for ZyXEL Omni 56K and Omni 56K Plus Modems
Service Class 2.0 Commands
Command
+FDT
+FDR
+FKS
+FIP
+FCLASS=n
+FMI?
+FMM?
+FMR?
+FCC=vr,br,wd,ln,df,ec,bf,st
5-12
Description
Transmit phase C data command:
releases the DCE to proceed with
the negotiation.
Receive phase C data command:
initiates document reception.
Terminate a Session , orderly fax
abort.
Initialize Service Class 2.0
Parameters.
Service Class Identification and
Control
Identify DCE Manufacturer
Identify DCE
Identify DCE Revision
Establish DCE Capabilities
Vertical Resolution
Bit Rate
Page Width
Page Length
Data Compression Format
Error Correction
Binary File Transfer
Value
n=0,1,2.0,8;refer to the +FCLASS
Class 1 command
ZyXEL
Omni 56K/Omni 56K Plus
Vx.x
vr=0:Normal;98 lpi
vr=1:Fine;196 lpi
br=0:2400 bps
br=1:4800 bps
br=2:7200 bps
br=3:9600 bps
br=4:12000 bps
br=5:14400 bps
wd=0:1728 pixels in 215mm
wd=1:2048 pixels in 255mm
wd=2:2432 pixels in 303mm
ln=0:A4;297mm
ln=1:B4;364mm
ln=2:unlimited length
df=0:1-D
df=1:2-D
ec=0:Disable
bf=0:Disable
Advertisement
Table of Contents
