ZyXEL Communications OMNI 56K User Manual page 51

+FIS=vr,br,wd,ln,df,ec,bf,st
+FCS=vr,br,wd,ln,df,ec,bf,st
+FLI="string"
+FPI="string"
+FLP=n
+FSP=n
+FNR=rpr,tpr,idr,nsr
+FIE=n
+FPS=n
User's Guide for ZyXEL Omni 56K and Omni 56K Plus Modems
Minimum Scan Time/Line
Current Session negotiating
parameters
Current Session Parameters
Local Facsimile station ID String,
TSI/CSI
Local Facsimile station ID String,
CIG
Indicate Document available for
polling
Enable/Disable polling
Negotiation Reporting Enable
Procedure Interrupt parameter
Page Transfer Status
st=0:0 ms
st=1:5 ms
st=2:10 ms (normal); 5 ms (fine)
st=3:10 ms
st=4:20 ms (normal); 10 ms (fine)
st=5:20 ms
st=6:40 ms (normal);20 ms (fine)
st=7:40 ms
The same as above
The same as above
n=0:No document
n=1:A document is available
n=0:Disable
n=1:Enable
rpr= 0:Receiver parameters are not
reported.
rpr=1:Receiver parameters are
reported.
tpr= 0:Transmitter parameters are
not reported.
tpr=1:Transmitter parameters are
reported.
idr= 0: ID Strings are not reported.
idr=1: ID Strings are reported.
nsr= 0:Non-standard frames are
not reported.
nsr= 1:Non-standard frames are
reported.
n=0:Disable
n=1:Enable
n=1:Received page is good.
n=2:Page is bad; retrain is
requested.
n=3:Page is good; retrain is
requested.
n=4:Page is bad; procedure
interrupt is requested.
5-13