Distinctive Ring - ZyXEL Communications OMNI 56K User Manual

RING
If the caller number and name are not available, the ring message will appear as follows:
RING
TIME: 04-28 12:30
REASON FOR NO NUMBER: OUT_OF_AREA
REASON FOR NO NAME: PRIVACY
RING
The last CND message that the modem received can be displayed by using the AT*T command.
Setting S48.0=1 will cause the modem to report CND information in its ASCII coded hexadecimal
raw data format. The DTE software is responsible for explaining the data.
NOTE: Please refer to the Bellcore Technical Advisory document
TR-NWT-000030 for the exact data format. The above Caller ID
scheme applies to the North America area. Different countries may
employ different Caller ID schemes, check if the scheme used in your
country is supported before using the Caller ID feature. For most
other Caller ID schemes, only the Caller telephone number is
provided.

Distinctive Ring

Distinctive Ring is a phone service that may be offered by your phone company. Check your phone
company for availability. With this service, you can have several phone numbers assigned to the
same phone line. The phone company will send a different type of ring signal for each phone
number being called. The subscriber can distinguish which number is called by which type of ring
is received.
User's Guide for ZyXEL Omni 56K and Omni 56K Plus Modems
3-9