ZyXEL Communications OMNI 56K User Manual page 61

Command bit dec
1 2
3 8
5 32
7 128
S36= bit dec
7-5 0
32
64
96
128
160
S38= bit Dec
0 1
3 0
3 8
4 16
5 32
S39= bit dec
2 4
S40= bit dec
1 2
2 4
3 8
4 16
5 32
6 64
S41= bit dec
0 1
3 8
4 16
User's Guide for ZyXEL Omni 56K and Omni 56K Plus Modems
hex Function and description
2 Disable aborting from terminal during modem
handshaking.
8 Add 16dB attenuation to the leased line transmission
power.
20 Enable Selective Reject in V.42. (Default)
80 Enable extended numerical result codes from 50-65
when an error corrected connection is made. Use with
ATV0. (see result code table)
hex Bit mapped register.
0 No security function. (Default)
20 Type 1* security, with password check.
40 Type 1* security, with password check and call back.
60 Type 2* security, with password check.
80 Type 2* security, with password check and call back.
A0 Type 2* security, with password check and call back;
call-back number from remote.
hex Bit mapped register.
1 Repeatedly dialing default number if not connected.
0 CD tracks the carrier. (Default)
8 DCD ON/OFF sequence follows UNIX standard, DCD
ON before connect message is sent, DCD off after last
DCE response is sent.
10 Auto-mode fax receiving disabled, hang up if a fax call is
received. (Default)
20 Disable MNP5 negotiation.
hex Bit mapped register.
4 Reverse the answers. Answer in originating mode.
hex Bit mapped register.
2 No result code is displayed in answer mode.
4 Enables caller ID detection.
8 Enables type 1 ring detection.
10 Enables type 2 ring detection.
20 Enables type 3 ring detection.
40 Enables type 4 ring detection.
hex Bit mapped register.
1 Special MNP compatibility. (see also S27.0, S38.5)
8 Enable CCITT signals 140 and 141 on EIA-232D
interface.
10 In X2-X7 setting, modem waits for S6 seconds before
dialing and ignores dial tone detection.
Ref.
V0
S23.6
*G0
*G1
*G2
*G3
*G4
*G5
+000
*Dn, S29
&C0
&C1, S21.4
&N0
&Kn
+032
ATA
+000
Q2
+000
&Kn
5-23