4.4.4 Summary: Bandwidth Management Monitor
Select the BW MGMT Monitor (Details...) hyperlink in Status screen. View the bandwidth
usage of the WAN configured bandwidth rules. This is also shown as bandwidth usage over
the bandwidth budget for each rule. The gray section of the bar represents the percentage of
unused bandwidth and the blue color represents the percentage of bandwidth in use.
Figure 12 Summary: BW MGMT Monitor
4.4.5 Summary: DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the
NBG318S as a DHCP server or disable it. When configured as a server, the NBG318S
provides the TCP/IP configuration for the clients. If DHCP service is disabled, you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Click the DHCP Table (Details...) hyperlink in the Status screen. Read-only information here
relates to your DHCP status. The DHCP table shows current DHCP client information
(including IP Address, Host Name and MAC Address) of all network clients using the
NBG318S's DHCP server.
Figure 13 Summary: DHCP Table
The following table describes the labels in this screen.
Table 7 Summary: DHCP Table
LABEL
#
IP Address
Host Name
NBG318S User's Guide
DESCRIPTION
This is the index number of the host computer.
This field displays the IP address relative to the # field listed above.
This field displays the computer host name.
Chapter 4 Introducing the Web Configurator
51