C
H A P T E R
This chapter gives you examples of how to set up a wireless access point and a wireless client
for wireless communication using some example settings.
6.1 Example Parameters
SSID
Channel
Security
802.11 mode
An access point (AP) or wireless router is referred to as an "AP" and a computer with a
wireless network card or USB/PCI adapter is referred to as a "wireless client" here.
We use the M-302 utility screens as an example for the wireless client. The screens may vary
for different models.
6.2 Configuring the AP
Flow the steps below to configure the wireless settings on your AP.
3 Open the Wireless LAN > General screen in the AP's web configurator.
NBG318S User's Guide
SSID_Example3
6
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
IEEE 802.11b/g
6
Tutorial
73