Log Settings; Table 77 Maintenance > Logs > View Log - ZyXEL Communications NBG-318S - V3.60 User Manual

Chapter 21 Logs
The following table describes the labels in this screen.
Table 77 Maintenance > Logs > View Log
LABEL
Display
Email Log Now
Refresh
Clear Log
Time
Message
Source
Destination
Note

21.2 Log Settings

You can configure the NBG318S's general log settings in one location.
Click Maintenance > Logs > Log Settings to open the Log Settings screen.
Use the Log Settings screen to configure to where the NBG318S is to send logs; the schedule
for when the NBG318S is to send the logs and which logs and/or immediate alerts the
NBG318S to send.
An alert is a type of log that warrants more serious attention. They include system errors,
attacks (access control) and attempted access to blocked web sites or web sites with restricted
web features such as cookies, active X and so on. Some categories such as System Errors
consist of both logs and alerts. You may differentiate them by their color in the View Log
screen. Alerts display in red and logs display in black.
Alerts are e-mailed as soon as they happen. Logs may be e-mailed as soon as the log is full
(see Log Schedule). Selecting many alert and/or log categories (especially Access Control)
may result in many e-mails being sent.
202
DESCRIPTION
The categories that you select in the Log Settings page (see
page 202) display in the drop-down list box.
Select a category of logs to view; select All Logs to view logs from all of the log
categories that you selected in the Log Settings page.
Click Email Log Now to send the log screen to the e-mail address specified in
the Log Settings page (make sure that you have first filled in the Address Info
fields in Log Settings).
Click Refresh to renew the log screen.
Click Clear Log to delete all the logs.
This field displays the time the log was recorded. See the chapter on system
maintenance and information to configure the NBG318S's time and date.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming
packet.
This field lists the destination IP address and the port number of the incoming
packet.
This field displays additional information about the log entry.
Section 21.2 on
NBG318S User's Guide