C
H A P T E R
Click Maintenance > Config Mode to open the following screen. This screen allows you to
hide or display the advanced screens of some features or the advanced features, such as MAC
filter or static route. Basic is selected by default and you cannot see the advanced screens or
features. If you want to view and configure all screens including the advanced ones, select
Advanced and click Apply.
Figure 129 Maintenance > Config Mode > General
The following table describes the labels in the screen.
Table 98 Maintenance > Config Mode > General
LABEL
Configuration Mode
Basic
Advanced
Apply
Reset
The following table includes the screens that you can view and configure only when you select
Advanced.
NBG318S User's Guide
Configuration Mode
DESCRIPTION
Select Basic mode to enable or disable features and to monitor the status of your
device.
Select Advanced mode to set advanced settings.
Click on this to set the mode.
Click on this to reset your selection to the default (Advanced).
23
221