OWC Mercury Elite Pro Dual 3-Port Hub Support Manual page 3

C. (1) Drive B Status LED – Blink red for SATA disk errors or missing disks. Blinks
green during SATA drive activity.
1.4 Rear View
A. (1) RAID selector dial – Select a desired RAID mode. See Section 2.4
"Hardware RAID Configuration" for more details regarding RAID management.
NOTE : Only works with SATA drives
B. (1) RAID Set button – Press and hold to confirm the selected RAID mode.
C. (1) USB 3.2 Gen 2 ( 10Gb/s) USB Type-C Host Port – connect a compatible
host computer here.
D. (1) USB 3.2 Gen 2 (10Gb/s) USB Type-C Hub port – connect a
compatible USB device here. Up to 3A bus power provided.
E. (1) USB 3.2 Gen 2 (10Gb/s) USB Type-A Hub Ports – Supports USB devices with
a Type-A connection.
NOTE : 900mA bus power provided per port.
F. (1) – Supports USB devices with a Type-A connection.
NOTE: 900mA bus power provided per port.