System Information - ZyXEL Communications GS 2200 Manual

8.2 System Information

In the navigation panel, click Basic Setting > System Info to display the screen as shown. You
can check the firmware version number.
Figure 41 Basic Setting > System Info
The following table describes the labels in this screen.
Table 9 Basic Setting > System Info
LABEL
System Name
Product Model
ZyNOS F/W
Version
Ethernet
Address
Hardware Monitor
Temperature
Unit
Temperature
Current
MAX
MIN
Threshold
Status
GS2200-8/24 User's Guide
DESCRIPTION
This field displays the descriptive name of the Switch for identification purposes.
This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
This field displays the version number of the Switch 's current firmware including the date
created.
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
The Switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch
printed circuit board.
This shows the current temperature at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Error for those above.
Chapter 8 Basic Setting
67