Bandwidth Control Setup - ZyXEL Communications GS 2200 Manual

Chapter 14 Bandwidth Control

14.2 Bandwidth Control Setup

Click Advanced Application > Bandwidth Control in the navigation panel to bring up the screen
as shown next.
Figure 82 Advanced Application > Bandwidth Control
The following table describes the related labels in this screen.
Table 37 Advanced Application > Bandwidth Control
LABEL DESCRIPTION
Active Select this check box to enable bandwidth control on the Switch.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to
set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to activate ingress rate limits on this port.
Ingress Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic
Rate flow on a port.
Note: Ingress rate bandwidth control applies to layer 2 traffic only.
Active Select this check box to activate egress rate limits on this port.
Egress Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out-going traffic
Rate flow on a port.
130
GS2200-8/24 User's Guide