ZyXEL Communications GS 2200 Manual page 274

Chapter 35 Access Control
Table 113 SNMP InterfaceTraps
OPTION OBJECT LABEL
linkup linkUp
LinkDownEventClear
linkdown linkDown
LinkDownEventOn
lldp LLDPRemoteTopologyChang
e
transceiver- DDMIRxPowerEventOn
ddm
DDMITemperatureEventOn
DDMITxBiasEventOn
DDMITxPowerEventOn
DDMIVoltageEventOn
DDMIRxPowerEventClear
DDMITemperatureEventClea
r
DDMITxBiasEventClear
DDMITxPowerEventClear
DDMIVoltageEventClear
274
OBJECT ID
1.3.6.1.6.3.1.1.5.4
1.3.6.1.4.1.890.1.5.8.55.27.2.2
1.3.6.1.4.1.890.1.5.8.56.27.2.2
1.3.6.1.4.1.890.1.5.8.59.27.2.2
1.3.6.1.4.1.890.1.5.8.60.27.2.2
1.3.6.1.6.3.1.1.5.3
1.3.6.1.4.1.890.1.5.8.55.27.2.1
1.3.6.1.4.1.890.1.5.8.56.27.2.1
1.3.6.1.4.1.890.1.5.8.59.27.2.1
1.3.6.1.4.1.890.1.5.8.60.27.2.1
1.0.8802.1.1.2.0.0.1
1.3.6.1.4.1.890.1.5.8.55.27.2.1
1.3.6.1.4.1.890.1.5.8.56.27.2.1
1.3.6.1.4.1.890.1.5.8.59.27.2.1
1.3.6.1.4.1.890.1.5.8.60.27.2.1
1.3.6.1.4.1.890.1.5.8.55.27.2.2
1.3.6.1.4.1.890.1.5.8.56.27.2.2
1.3.6.1.4.1.890.1.5.8.59.27.2.2
1.3.6.1.4.1.890.1.5.8.60.27.2.2
DESCRIPTION
This trap is sent when the Ethernet link is
up.
This trap is sent when the Ethernet link is
up.
This trap is sent when the Ethernet link is
down.
This trap is sent when the Ethernet link is
down.
This trap is sent when the LLDP (Link
Layer Discovery Protocol) remote topology
changes.
This trap is sent when one of the device
operating parameters (such as transceiver
temperature, laser bias current,
transmitted optical power, received optical
power and transceiver supply voltage) is
above or below a factory set normal
range.
This trap is sent when all device operating
parameters return to the normal operating
range.
GS2200-8/24 User's Guide