OWC MERCURY ON-THE-GO PRO Assembly Manual & User Manual page 4

1.4 LED INDICATOR
The Mercury On-The-Go Pro has a blue LED at the front. The LED emits a solid
blue light when the unit is powered on and flashes during drive activity.
1.5 REAR VIEW
1
1.5.1 Rear Features
1. USB 3.1 Gen 1 port — Attach the included USB 3.1 Gen 1
(Standard-A to Micro-B) cable here.
2. On/Off switch — Power the Mercury On-The-Go Pro on and off here.
3. Power input — Connect the optional 5V power adapter here (sold separately).
4. FireWire 800 ports — Attach the included 9-9 pin FireWire 800 cable to one of
these ports and to the computer. Use the other FireWire 800 port to daisy-chain
other FireWire 800 devices. NOTE: Any device daisy-chained to the Mercury On-
The-Go Pro must be powered by its own power supply. The Mercury On-The-
Go Pro cannot bus power other devices.
OWC MERCURY ON-THE-GO PRO
1
4
2
2 3
3 2
INTRODUCTION