Vlan - ZyXEL Communications NWA1000 Series User Manual

Table 30 Configuration > Network > IP Setting (continued)
LABEL
Link-Local
Address
IPv6 Address/
Prefix Length
Gateway
Metric
DHCPv6 Client
DUID
Request Address
DHCPv6 Request
Options
DNS Server
NTP Server
Apply
Reset

9.3 VLAN

This section discusses how to configure the NWA1000 Series's VLAN settings.
Figure 43 Management VLAN Setup
In the figure above, to access and manage the NWA1000 Series from computer A, the NWA1000 Series
and switch B's ports to which computer A and the NWA1000 Series are connected should be in the
same VLAN.
Chapter 9 Network
DESCRIPTION
This displays the IPv6 link-local address and the network prefix that the NWA1000 Series
generates itself for the LAN interface.
Enter the IPv6 address and the prefix length for the LAN interface if you want to use a static
IP address. This field is optional.
The prefix length indicates what the left-most part of the IP address is the same for all
computers in the network, that is, the network address.
Enter the IPv6 address of the default outgoing gateway using colon (:) hexadecimal
notation.
Enter the priority of the gateway (if any) on the LAN interface. The NWA1000 Series decides
which gateway to use based on this priority. The lower the number, the higher the priority. If
two or more gateways have the same priority, the NWA1000 Series uses the one that was
configured first. Enter zero to set the metric to 1024 for IPv6.
Select this option to set the NWA1000 Series to act as a DHCPv6 client.
This field displays the DHCP Unique IDentifier (DUID) of the NWA1000 Series, which is unique
and used for identification purposes when the NWA1000 Series is exchanging DHCPv6
messages with others. See Appendix B on page 235
Select this option to get an IPv6 address from the DHCPv6 server.
Select this option to determine what additional information to get from the DHCPv6 server.
Select this option to obtain the IP address of the DNS server.
Select this option to obtain the IP address of the NTP server.
Click Apply to save your changes back to the NWA1000 Series.
Click Reset to return the screen to its last-saved settings.
NWA1000 Series User's Guide
74
for more information.