Download Print this page

SORG Jump beta Instructions For Use Manual page 9

Hide thumbs Also See for Jump beta:

Advertisement

2 General information
2.3 General safety information
Before each use, check:
the frame, back tubes, add-on parts and accessories for visible damage, bending, cracks
or missing or loose screws,
the wheels and quick-release axles for tightness,
that the inflation pressure and tyre tread are sufficient,
that the brakes are working properly,
that the angle adjustment elements/ eccentric clamps are secure,
that the seat plate/ back/ footrest are tightly locked,
that the anti-tipper/seat and back belts are functioning correctly,
that all previously dismantled components have been reconnected and firmly locked.
There is a risk of injury (e.g. due to crushing) from all rotating, swivelling or foldable com-
ponents, even during adjustment and repair work and during transport.
-10 to + 41°C
30 - 70%
Danger of tipping over and overturning
Occupants must only get in and out of the wheelchair with the wheel lock and anti-tipper engaged.
The risks listed as examples below may occur when dismantling the following parts/
accessories:
Cushions: lack of hygiene / pressure points
Headrest: loss or missing headrest during transport
Driving wheels: loss of the back (use of wheelchair not possible)
2024-10-16
and out of the wheelchair. The wheelchair
might tilt forward.
Instructions for use Jump beta
x
y
Do not use the footrest(s) for getting in
x >700 mm
!
y > x + 50 mm
9 of 52

Advertisement

loading
Need help?

Need help?

Do you have a question about the Jump beta and is the answer not in the manual?

This manual is also suitable for:

Jump beta sportJump beta bsa