SORG Jump beta Instructions For Use Manual page 46

4 Repairs/maintenance/reinstatement
4.1 Repairs
Repairs must only be carried out by a specialist dealer.
4.2 Spare parts
Only original replacement parts may be used. These can be obtained from your specialist dealer.
The replacement parts list can be downloaded from www.sorgrollstuhltechnik.de or re-
quested from us.
Please indicate the serial number of your wheelchair to ensure correct replacement part deliv-
ery. This can be found on the nameplate on the frame.
4.3 Maintenance
Regularly clean the wheelchair and all components using a mild, water-based household deter-
gent and then dry thoroughly.
Also clean the driving and swivel casters and remove dirt and impurities (e.g. hair etc.) from the
axles.
Washing textile parts:
Care instructions:
Wipe down imitation leather, belts and other upholstery:
Care instructions:
4.4 Disinfection
Cleaning must be carried out before each disinfection. Use a household water-based agent for
disinfection. Please observe the application instructions of the respective manufacturer.
4.5 Storage
• Carry out cleaning
• Fold up foldable wheelchair (if applicable)
• Set (seating unit) tilt mechanism (if present) to 90°.
• Pack detachable textile parts in foil or the like, if necessary
• Secure the wheelchair against rolling away and contamination
• Storage in a dry place without aggressive environmental influences
46 of 52 Instructions for use Jump beta 2024-10-16