SORG Jump beta Instructions For Use Manual page 13

2 General information
Any braking devices fitted to the wheelchair must be in the braked position when the
wheelchair is transported in a motor vehicle.
2.3.3 Other important information
The seat shell­underframe has been tested and verified for resistance to ignition of textile
materials in compliance with the applicable standards. Nevertheless, there is a risk of ignition of
the flame­retardant textile components. Keep any sources of ignition away from the wheelchair.
The wheelchair must neither be exposed to excessive moisture nor come into contact with
salt water.
°C
> 42°C
When configuring the wheelchair, pelvic restraints (lap belts as positioning aids) can be option-
ally purchased via the SORG order sheets or by ordering from the replacement parts catalogues.
Your specialist dealer will carry out the assembly.
The product may interact with electromagnetic fields (e.g. shop anti­theft devices) in individual
cases. This poses no danger to the user and/or the attendant.
The wide variety of settings available means that not all limit values can be complied with in all
possible configurations in accordance with the Regulation (EU) on the technical specifications for
interoperability relating to accessibility of the Union's rail system for persons with disabilities and
persons with reduced mobility.
Please contact your specialist dealer or us as the manufacturer if you experience any issues with
the wheelchair. Product recalls etc. will be published on our website www.sorgrollstuhltechnik.
de. You can also find the respective contact persons there.
Corrosion protection
The product has been designed with corrosion protection in mind when selecting the materials
(e.g. plastic, aluminium, stainless steel). All materials prone to corrosion are surface-treated and
are therefore protected.
The wheelchair must be dried thoroughly if it becomes wet.
2024-10-16 Instructions for use Jump beta 13 of 52