Cable Pin Assignments; Figure 168 Console/Dial Backup Port Pin Layout; Table 123 Console/Dial Backup Port Pin Assignments; Table 124 Ethernet Cable Pin Assignments - ZyXEL Communications ES-3124PWR User Manual

Chapter 38 Product Specifications

38.2 Cable Pin Assignments

In a serial communications connection, generally a computer is DTE (Data Terminal
Equipment) and a modem is DCE (Data Circuit-terminating Equipment). The Switch is DCE
when you connect a computer to the console port. The Switch is DTE when you connect a
modem to the dial backup port.

Figure 168 Console/Dial Backup Port Pin Layout

Table 123 Console/Dial Backup Port Pin Assignments

CONSOLE Port RS – 232 (Female) DB-9F
Pin 1 = NON
Pin 2 = DCE-TXD
Pin 3 = DCE –RXD
Pin 4 = DCE –DSR
Pin 5 = GND
Pin 6 = DCE –DTR
Pin 7 = DCE –CTS
Pin 8 = DCE –RTS
PIN 9 = NON
The CON/AUX port also has these pin
assignments. The CON/AUX switch changes
the setting in the firmware only and does not
change the CON/AUX port's pin assignments.

Table 124 Ethernet Cable Pin Assignments

WAN / LAN ETHERNET CABLE PIN LAYOUT
Straight-through
(Switch)
3. Pins 2,3 and 5 are used.
296
3
Pin 5
Pin 9
(Adapter) (Switch)
DIAL BACKUP RS – 232 (Male) DB-9M (Not on all
models)
Pin 1 = NON
Pin 2 = DTE-RXD
Pin 3 = DTE-TXD
Pin 4 = DTE-DTR
Pin 5 = GND
Pin 6 = DTE-DSR
Pin 7 = DTE-RTS
Pin 8 = DTE-CTS
PIN 9 = NON.
Switchs with a CON/AUX port also have a 9-pin
adaptor for the console cable with these pin
assignments on the male end.
Crossover
ES-3124 Series User's Guide
Pin 1
Pin 6
(Switch)