Table 103 SNMP Switch Traps (continued)
OPTION
OBJECT LABEL
mactable
MacTableFullEventOn
MacTableFullEventClear
rmon
RmonRisingAlarm
RmonFallingAlarm
30.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access Control to
go back to the Access Control screen.
Figure 144 Management > Access Control > SNMP
ES-3124 Series User's Guide
OBJECT ID
ES-3124:
1.3.6.1.4.1.890.1.5.8.12.27.2.1
ES-3124 PWR:
1.3.6.1.4.1.890.1.5.8.14.27.2.1
ES-3124-4F:
1.3.6.1.4.1.890.1.5.8.26.32.2.1
ES-3124F:
1.3.6.1.4.1.890.1.5.8.31.32.2.1
ES-3124:
1.3.6.1.4.1.890.1.5.8.12.27.2.2
ES-3124 PWR:
1.3.6.1.4.1.890.1.5.8.14.27.2.2
ES-3124-4F:
1.3.6.1.4.1.890.1.5.8.26.32.2.2
ES-3124F:
1.3.6.1.4.1.890.1.5.8.31.32.2.2
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
Chapter 30 Access Control
DESCRIPTION
This trap is sent when more than
99% of the MAC table is used.
This trap is sent when less than
95% of the MAC table is used.
This trap is sent when a variable
goes over the RMON "rising"
threshold.
This trap is sent when the variable
falls below the RMON "falling"
threshold.
255