Advertisement
Save Settings: All changes must be saved to take effect.
Reset to Defaults: This button allows the PIXELATOR MINI to reset back to factory default via web interface.
Please refer to the Reset to Factory Defaults section of this document for mor e information.
Reboot: Please allow up-to 10 seconds for the device to reboot. When the web interface page refreshes the
PIXELATOR MINI is ready.
Network Stats
The Network Stats page shows statistics for the input DMX protocol selected.
The information provided is:
Art-Net
Total Packets Received
Poll Packets Received
Data Packets Received
Sync Packets Received
Last IP where Art-Net packets were received from
Last port data received from
ESP
Total Packets Received
Poll Packets Received
Data Packets Received
Last IP where ESP packets were received from
Last port data received from
sACN
Total Packets Received
Data Packets Received
Sync Packets Received
Last IP where sACN packets were received from
Last port data received from
12 |
ID: 5934948
Document Updated: Dec 2024
PIXELATOR MINI (70067)
ENTTEC website
Visit the
USER MANUAL
for the latest version.
Advertisement
Need help?
Do you have a question about the PIXELATOR MINI 70067 and is the answer not in the manual?