Fig. 23 – Rinsing the filter
Allow the HEPA filter and sponge filter
to dry overnight before using the filters
again. A hair dryer with cold air can also
be used to dry them.
Once the dust container and filter com-
ponents are dry, insert the filters back
into the dust container in reverse order.
Before using the appliance again, ensure
that the filters have been inserted cor-
rectly in the dust container.
Fig. 24 – Inserting the filter
11.2. Cleaning water tank/
wiping cloth
Fig. 25 – Removing/rinsing the wiping cloth
Lift off the wiping cloth from the water
tank and slide the wiping cloth strip out
of the groove as shown in the figure.
Rinse the wiping cloth under running wa-
ter in between.
Wash the wiping cloths in the washing
24
machine at max. 40°C.
Separate the water tank from the dust
container.
Wash out the water tank with clean wa-
ter and allow the water tank and wiping
cloths to dry completely.
11.3. Cleaning the side brush-
Clean the side brushes regularly.
Switch off the appliance and place it
upside down onto a flat surface with the
bottom of the appliance facing upwards.
If necessary, remove the side brush to make it
easier to clean:
Release the screw on the brushes using a
Phillips screwdriver.
Hold the side brushes firmly and pull
them straight up to remove them from
the appliance.
Remove dirt and hair from the side
brushes.
es
Fig. 26 – Removing side brushes
DE
FR
NL
ES
IT
EN
153
Need help?
Do you have a question about the S05 SW and is the answer not in the manual?