Advertisement
Quick Links
Serial Number Location
ATTAIN
S E R I A L
1 2 3 4 5 6 7 8
Record your Serial number
and purchase date here:
S/N __________________
PURCH.DATE:_________
DEALER:______________
______________________
______________________
Model No. H804
F320V3
ATTAIN FITNESS
H804 FID BENCH
OWNER'S MANUAL
Fitness Authority Industrial Co., LTD.
No. 15, Xiangxue Rd., Dali Dist.,
Taichung City 41275, Taiwan.
Advertisement
Related Manuals for ATTAIN FITNESS H804
Summary of Contents for ATTAIN FITNESS H804
- Page 1 H804 FID BENCH OWNER’S MANUAL Serial Number Location ATTAIN S E R I A L 1 2 3 4 5 6 7 8 Record your Serial number and purchase date here: S/N __________________ PURCH.DATE:_________ DEALER:______________ ______________________ ______________________ Model No. H804 Fitness Authority Industrial Co., LTD.
- Page 2 8. Make certain all cables are seated within the pulleys before every use. 9. Exercise with care to avoid injury. 10. If you are unsure about the proper use of the ATTAIN FITNESS H840, call your local ATTAIN FITNESS dealer or our customer service department.
- Page 3 Gym Placement Planner 21” HEIGHT 21" 62.6” Important Notes and Tips: Recommended Tools 1. Do not tighten bolts until instructed. for Assembly 2. Two people are required for the safe assembly of this product. Ratchet 3. Use window cleaner or water to assist with sliding roller pads on to tubes.
- Page 4 H804 Bench Assembly Parts List 1 NOTE: IF A PART IS MISSING, IT LIKELY HAS BEEN PRE-INSTALLED FOR QUALITY CONTROL PURPOSES. PLEASE PROCEED WITH ASSEMBLY. *Parts images are not to scale. (1) SEAT SUPPORT (2) SEAT (3) FRONT SLIDER STABILIZER...
- Page 5 H804 Bench Assembly Parts List 2 NO. DESCRIPTION QTY. 1/2" X 4-1/2" HEX HEAD BOLT 1/2" X 4-1/4" HEX HEAD BOLT 1/2" X 2-3/4" HEX HEAD BOLT 1/2" X 2-1/2" HEX HEAD BOLT 3/8" X 2-3/4" HEX THREADED BOLT 3/8" X 1" HEX THREADED BOLT 1/2"...
-
Page 6: Assembly Instruction
ASSEMBLY INSTRUCTION Do not tighten bolts until instructed. 1. Attach two RECT. End Caps (11) and two RECT. End Plugs (12) onto Seat Support (1), then slide Seat Slider (2) into Seat Support (1). Attach 50mm SQ. End Plug (13) onto Seat Slider (2). -
Page 7: Exploded View
EXPLODED VIEW... - Page 8 COMPLETE PARTS CHART NO. DESCRIPTION QTY. SEAT SUPPORT SEAT SLIDER FRONT STABILIZER FRONT UPRIGHT BACK SUPPORT SEAT HINGE LEG/KNEE HOLD DOWN BACK ADJUSTER FOAM PAD HOLDER U PIN 45 X 75mm RECT. END CAP 45 X 75mm RECT. END PLUG 50mm SQ.
- Page 9 Make certain all bolts are tightened securely. Enjoy many years of a Fit Lifestyle. Thank you for purchasing the ATTAIN FITNESS H804 FID BENCH! If you have any questions or comments,please contact our customer service department at +1 877-551-7484 and info@attainfitnessusa.com.
Need help?
Do you have a question about the H804 and is the answer not in the manual?
Questions and answers