Bowflex Results Series Troubleshooting Manual

3/12/24, 9:24 AM
Results Series BXT116 Treadmill: What is a Safety Key error and how can I
clear it?
Follow this troubleshooting guide to help resolve safety key error messages on your Results Series BXT116 Treadmill.
Some common complaints may include:
Safety Key error message
Can't start with safety key inserted
Safety key not working
Follow these steps to troubleshoot the issue
Tools you may need:
Phillips head screwdriver
Flathead screwdriver
6mm hex/Allen wrench, or the wrench from the hardware
card included with your machine
1.
A safety key error appears when the safety key is not fully inserted or not inserted at all into your treadmill. To clear
the error message, remove the safety key and reinsert it. Test your machine to see if the error message clears
[12167.A].
2.
If the issue persists, inspect the safety key for damage. If damage is present,
3.
If no damage is present, unplug your machine from power and wait 5 minutes before removing the back of the
console. Refer to the "Replace the Console Assembly" section of the
console from your machine.
the console (reference 1). Remove the back from the console and set it to the side.
The red circles indicate the locations of the screws to remove; 3 on top, 3 on bottom, and 2 on either side near the top.
about:blank
Results Series BXT116 Treadmill:  What is a Safety Key error and how can I clear it?
Once removed, use a Phillips head screwdriver to remove the 10 screws from the back of
(Reference 1)
The console back is pictured from the inside of the console.
order a Safety Key [12167.B].
service manual for instructions on removing the
ID: 12167.1
1/5