Bowflex Results Series Troubleshooting

3/12/24, 9:13 AM
BowFlex Results Series Treadmill - Check Firmware Version and Error Log
"Procedure 2"
Applicable for treadmill models: BXT116, BXT216, BXT6
Follow these steps to check the firmware version and error log for troubleshooting
1.
From the Welcome (or Power Up) screen, hold down the PAUSE/STOP button and Down arrow button together for
3 seconds to enter Machine Settings mode.
2.
Console will display the TOTAL HOURS screen.
3.
Record the TOTAL HOURS numbers shown.
4.
Push the Right arrow button to go to the next option.
5.
Console Firmware Version is displayed, record the version.
6.
Push the Right arrow button to go to the next option.
7.
Motor Control Board Firmware Version is displayed, record the version.
8.
Push the Right arrow button until the Console displays VIEW ERROR MSG NO.
9.
Press the Up arrow button to select VIEW ERROR MSG YES, and press ENTER.
10.
Record the error codes shown.
11.
Press the Right Arrow then record the next number shown until screen displays RESET LOG:NO.
12.
If you have recorded all the numbers, press the ENTER button and screen will display ERROR LOG RESET YES.
13.
Press ENTER.
14.
Press PAUSE/STOP to return to Welcome screen.
about:blank
BowFlex Results Series Treadmill - Check Firmware Version and Error Log
Please reference this graphic for button positions:
ID: 12171.2
1/3