Bowflex Results Series Troubleshooting Manual

3/12/24, 9:40 AM
Results Series BXE116 Elliptical: I'm having issues with my heart rate
chest strap
Follow this troubleshooting guide to help resolve issues involving the heart rate chest strap on the Results Series BXE116
Elliptical. Troubleshooting for the heart rate sensors on your elliptical can be found
Why aren't the heart rate contact plates working?
Some common complaints may include:
Heart rate chest strap will not connect
Heart rate does not register on machine
Follow these steps to troubleshoot the issue
1.
Ensure the chest strap is "POLAR" compatible and uncoded. Place the heart rate chest strap against bare skin, just
below the chest muscles, and buckle it [12609.A].
2.
Make sure the heart rate strap transmitter operates in the 4.5 - 5.5 kHz
3.
Ensure the strap is facing up and the contact areas are damp. If the strap is dirty, remove it and clean it with mild soap
and water. Thoroughly dry once clean. Do not submerge the strap in water [12609.C].
4.
Move your elliptical away from any sources of potential electromagnetic interference, such as TV, computers,
microwave, cordless or cell phones, etc. [12609.D].
5.
Check the Wireless HR settings in Edit User Profile mode by pressing and holding the User button for 3 seconds. Use
the button pad to select the WIRELESS HR setting and ensure that the current value is set to ON. You can use the
increase/decrease buttons to scroll through the settings and the left/right buttons to choose a value. Once selected,
use the Enter button to confirm your selection. Pressing the STOP/PAUSE button will exit the Edit User Profile mode
(reference 1) [12609.E].
about:blank
Results Series BXE116 Elliptical:  I'm having issues with my heart rate chest strap
(Reference 1)
here: Results Series BXE116 Elliptical:
range [12609.B]
ID: 12609.1
1/3