Related Manuals for Rigol PVA8000S Series
Summary of Contents for Rigol PVA8000S Series
- Page 2 • RIGOL products are covered by P.R.C. and foreign patents, issued and pending. • RIGOL reserves the right to modify or change parts of or all the specifications and pricing policies at the company's sole decision. • Information in this publication replaces all previously released materials.
- Page 3 4.3 Function Inspection ..........................14 4.4 To Adjust Offset Voltage .........................15 4.5 To Calibrate the Probe ........................15 5 Care and Cleaning ......................6 Specifications ........................7 Warranty ........................... Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. PVA8000S Single-ended Active Probe User Guide...
- Page 4 .....................11 Figure 4.4 Ground Lead ......................Figure 4.5 Probe Clip ......................Figure 4.6 Y-lead Adapter .....................13 Figure 4.7 Right-angle Adapter ..................Figure 4.8 Cable Clamp ......................14 PVA8000S Single-ended Active Probe Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. User Guide...
- Page 5 Stop using it with suspected failures. • Do Not Operate with Suspected Failures. If you suspect that there is damage to the product, have it inspected by RIGOL authorized personnel before further operations. Any maintenance, adjustment or Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
- Page 6 Safety Requirement replacement especially to circuits or accessories must be performed by RIGOL authorized personnel. • Avoid Exposed Circuitry. Do not touch exposed circuits and components after the power is connected. • Do Not Operate in Wet Conditions. For indoor use only. To avoid short circuit inside the instrument or electric shock, never use the product in a humid environment.
- Page 7 You can click on the following link https://int.rigol.com/services/services/declaration to download the latest version of the RoHS&WEEE certification file. Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. PVA8000S Single-ended Active Probe User Guide...
- Page 8 This manual gives you a quick overview of the technical specifications and basic operation methods of the PVA8000S Series Single-ended Active Probe. http:// For the latest version of this manual, download it from RIGOL official website ( www.rigol.com Publication Number...
- Page 9 Please check the accessories according to the packing lists. If the accessories are damaged or incomplete, please contact your RIGOL sales representative. Probe Size The figure below shows the main body of the PVA8000S Series Single-ended Active Probe. Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
- Page 10 ) the connection between the the probe and the oscilloscope interface. 3. Probe tip socket, used to connect the probe or adapter to input measurement signals. PVA8000S Single-ended Active Probe Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. User Guide...
- Page 11 It enables you to quickly identify the channel connected to each probe. Standard Accessories The table below lists the standard accessories of the PVA8000S series active probe. To Use Probe Accessories For how to use them, please refer to...
- Page 12 Product Overview Z-Ground Lead 3'' Ground Lead Push-in Probe Tip Right-angle Adapter 6'' Ground Lead Y-Lead Adapter Cable Clamp Probe Clip PVA8000S Single-ended Active Probe Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. User Guide...
- Page 13 To Connect the Oscilloscope After the PVA8000S Series Single-ended Active Probe is properly connected to RIGOL MSO8000/DS70000/DHO4000 series oscilloscope, the oscilloscope recognizes the probe automatically and provides power and offset voltage for the probe via the front To Adjust Offset Voltage panel.
- Page 14 This section introduces the purpose and using method of each accessory. Standard Accessories The parts of the PVA8000S series can be ordered from RIGOL (see Push-in Probe Tip The push-in probe tip applies to the hand-held spot test for near-distance test points or the soldering test.
- Page 15 0.025 inch pins. 1. Seat the lead pin into the probe ground socket and then gently push it in until it is seated. Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. PVA8000S Single-ended Active Probe User Guide...
- Page 16 2. Then press the handle of the clip to extend the metal hook. 3. Rotate the clip for proper orientation and attach the hook to the test pin. PVA8000S Single-ended Active Probe Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. User Guide...
- Page 17 The right- angle adapter can be used directly with the probe, or attached to the Y-lead adapter or ground leads. Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. PVA8000S Single-ended Active Probe User Guide...
- Page 18 Use the following measurement procedure to perform the function inspection to ensure that your probe is functioning properly. 1. Restore the oscilloscope to its factory default settings. PVA8000S Single-ended Active Probe Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. User Guide...
- Page 19 To Adjust Offset Voltage RIGOL MSO8000/DS70000/DHO4000 series oscilloscope provides offset voltage for the PVA8000S Series Single-ended Active Probe. The offset voltage is used to adjust the signal under test that is out of the input dynamic range of the active probe amplifier to ensure the signal integrity.
- Page 20 User Guide of your oscilloscope. NOTE The specification of the PVA8000S series depends on the calibration of the probe. After the calibration is completed, the DC gain, offset voltage zero point, and offset gain are calibrated. After the probe is connected, you can check the probe information including the vendor, model, serial number, and the last calibration time on the probe setting menu.
- Page 21 WARNING To avoid short circuits or personal injury caused by moisture, make sure that the probe is completely dry before use. Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. PVA8000S Single-ended Active Probe User Guide...
- Page 22 ≤1.5dB (1 GHz to 1.5 GHz) Non-destructive Input ±20 V (DC + Peak AC) Voltage (Max.) Probe Noise <2 mVrms (referred to input) Output Impedance 50 Ω PVA8000S Single-ended Active Probe Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. User Guide...
- Page 23 Probe Net Weight: 163 g ± 10 g Weight Probe Kit (package included): 763 g ± 50 g NOTE [1]: Typical value. The specifications would change when different scales are selected. Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. PVA8000S Single-ended Active Probe User Guide...
- Page 24 RIGOL guarantees free replacement or repair for the defective product. To get repair service, please contact your nearest RIGOL sales or service office. There is no other warranty, expressed or implied, except such as is expressly set forth herein or other applicable warranty card.
Need help?
Do you have a question about the PVA8000S Series and is the answer not in the manual?
Questions and answers